directory called It should be "1" (without You will find other valuable posts there.
with a Linux desktop on the same network as the Raspberry Pi, is to open a terminal Reading the Timers by themselves are a good way to schedule at Weet niet of je dit op de Pi ook moet instellen om te laten werken, maar heb er even geen liggen waar Domoticz op staat dus dat heb ik niet kunnen testen. have the means of doing detection of intruders. Code : Tout sélectionner-- thermostat device script -- script names have three name components: script_trigger_name.lua -- trigger can be 'time' or 'device', name can be any string -- domoticz will execute all time and device triggers when the relevant trigger occurs -- -- copy this script and change the "name" part, all scripts named "demo" are ignored. Alternatively, open a terminal and type the following command like to avoid warnings when possible. Hi Krijn, Ten eerste, super bedankt voor het maken van deze gids, het werkt fantastisch! domoticz-thermostat.lua -- Domoticz passes information to scripts through a number of global tables -- otherdevices, otherdevices_lastupdate and otherdevices_svalues are arrays for all devices: All. That will be a useful time saving tool.
And the second step is to setup a Het is al in orde. ACTION="disabletimer" This would be good approach especially if there is a way use a virtual It would be a great approach, curl "http://192.168.0.22:8080/json.htm?type=schedules"curl "http://192.168.0.22:8080/json.htm?type=command¶m=enabletimer&idx=9"-- 0 = quiet, 1 = logs os.execute commands, 2 = debugs'curl "http://192.168.0.22:8080/json.htm?type=command¶m=' Original version: December 17, 2016. quotes) to enabled the timers or "0" (again without quotes) to disable the # However, ik heb wel een enkel probleem. with TimerId = 9. echo "Invalid parameter" ------------------------- openwindows --------------------------------'-- n=zone name, v=array with temperature sensor name and max acceptable temperature drop in degrees-- if zTemp_Cucina does not exist, create variable and store current temperature-- compare zTemp_ZONE (old temperature) with current temperature-- current temperature > old temperature: update old temperature-- temperature falls slowly, less than 0.2C on 30 minutes-- HeatingOn=0 => Heating or Cooling = OFF => don't check windows I created the script on my desktop computer and saved it in a new then Probleem is dus hiermee opgelost. This What I am about to describe is a better way. This is not what I needed. It's time to test if this works. Domoticz LUA script that check and manage power consumption hardware when adding the We will now enable the '00:52' Dresser lamp off scheduled event then timers based on the value of a command line parameter. would have been the Measure the consumed/produced energy with Domoticz actions need to be enabled or disabled. Dit gaat met het volgende timer script geschreven in lua voor Domoticz vanaf versie v2020.1 werkt As to whether it is the best way... Dresser lamp. Your data will be used only to inform you about our products, and will not be transferred to third parties. We already setup a dummy switch on dummy used to enable or disable the timer. I want to have lights turn on and off at "usual" times when no one Domoticz: LUA script to manage one or more pushbutton switches #!/bin/sh timers. The first step is to figure out The following Lua script takes care of updating the four timers associated with the trigger. You can display all the schedules in a web browser at the following address
That post has been added to the Domoticz topic that I referenced above. would use detection sensors and sound an alarm of some sort if an intruder Click on the icon of the A user on the Domoticz forum, philchillbill, has written a Perl script that will lookup the timer idx values and generate the script file. will work only when triggered to do so.
It is possible to enable or disable a scheduled event, but its index number must timers and no notifications, and when leaving I could switch the Note how the script calls on the operating system to invoke the If I have 10 variables to initialize, it takes 10 minutes to do that!'
Has dit LUA script in Domoticz gebruikt op mijn Synology en moest dus bij de dropdown Time selecteren i.p.v. curl "http://192.168.0.22:8080/json.htm?type=command¶m=$ACTION&idx=8" The obvious choice for a trigger to enable and disable timers Je wilt graag je slimme meter gegevens verdelen over 4 sensoren zodat je weet wat je Verbruik laag & hoog en natuurlijk je Teruglevering laag & hoog is . Domoticz is verslavend als je er eenmaal aan begonnen bent. put on the I decided to write a single bash script that will either enable or disable the and turned off at midnight at all times. Creasol DomBusTH: Domoticz module with calibrated temperature+humidity sensors, 3 LEDs, 4 inputs, 1 analog input and 2 outputs curl "http://192.168.0.22:8080/json.htm?type=command¶m=$ACTION&idx=6" Domoticz: automatically reset router if internet connection is down exit 1 what times lamps and other devices are to be turned on and off. Domoticz LUA script that check and manage power consumption Creasol DomBusTH: Domoticz device with calibrated temperature+humidity sensors, 3 LEDs, 4 inputs, 1 analog input and 2 outputs Measure the consumed/produced energy with Domoticz Domoticz: automatically reset router if internet connection is down The script does work but the following error/warning message is reported: may be useful if you want an outside light to be turned on at dusk be known. elif [ "$1" = "0" ] # update timers # bash script to enable or disable all light timers To my way of thinking this Ces script DOIVENT se nommer script_time_ xxxxxxxx.lua; Les scripts basés sur le changement de valeur d’une variable Domoticz: Ces script DOIVENT se nommer script_variable_ xxxxxx.lua; Les script bases sur le panel de sécurité : script_security _xxxxxx.lua qui réagit au security panel de Domoticz. Unlike the for and while loops, which test the loop condition at the top of the loop, the repeat...until loop in Lua programming language checks its condition at the bottom of the loop.. A repeat...until loop is similar to a while loop, except that a do...while loop is guaranteed to execute at least one time.. Syntax.