In this configuration, the device will turn a channel on when one of its buttons is pressed and turn off the same channel when the button is pressed again. paired in minutes, had everything working with Alexa and tested within 25 minutes.Reviewed in the United Kingdom on December 11, 2017 When set an action to happen,the IFTTT service automatically triggers another separate actionAllow you to set a daily, weekly or monthly time limit for appliances and the switch will automatically turn on or off them at a particular time It worked perfectly for a number of weeks, but has failed only a few days after the Amazon return window closed... it cannot now be paired with the eWeLink app (pairing seems to work but device doesn't connect with the host WiFi... no problems with signal as four other Sonoff devices bought at same time all pair and work OK). You can set some devices in inching mode, while the others in self-locking modeIf you have owned smart appliances, the IFTTT function will bring you many advantages for smarter and more convenient control. The setup and configuration of the device and app was pretty straight forward. It is similar to the original Sonoff 4CH in the number of outputs that it supports, but differs in the fact that … I was wary of this item as I couldn't believe something as cheap compared to all the big players in home automation would work well, it does work very well and it is fairly easy to setup. In short its ok, but leave it on for a week or two and you'll need to remove the power as it keeps dropping thew wifi connection if you dontReviewed in the United Kingdom on December 31, 2017 No entiendo lo que ha escrito un usuario al respecto del sistema.
The idea is that once you release the button for the channel, it will stay on until the timer for that channel expires. Ive had a play with the unit today and I am very pleased with it. Please try againSorry, we failed to record your vote. Use the ESP programming header as described in the picture to upload the firmware and follow regular programming procedure.If you have problems to program the 4CH Pro, you might find below tips useful: * Use the ESP program header and ensure that the right port is set in the Arduino IDE. Great solution. Has worked pretty flawlessly so far. 1 Piece DIN Rail Slotted Aluminum RoHS 12" Inches Long 35mm Wide 7.5mm High
I power it off an Altronix power supply. Sonoff 4CH Pro & 4CH Pro R2 are 4 gang WiFi switches. Paid 30$ for a six pack of disc lights. The bad part about the smart device interface with Alexa is the need for the outside APP to hook up with Alexa. This should be able to cover a wide range of projects and uses out there.The device has three modes configurable by jumper switches underneath the Sonoff 4CH’s case. App issues I agree with.Device seems to be built well. HOWEVER, and it is the reason why I returned this device, after a couple of days of use, we have a power outage at my house.
The board does not respond to any button pressed when in programming mode and LED 1, 2 and 3 are on (might differ per board). Permite varios tipos de configuraciones. I use it to control my heating, it has made my 3 channel timeclock almost redundant. It also analyzes reviews to verify trustworthiness.Sorry, we failed to record your vote. The manual describes jumper settings incorrectly. Unfortunately, I have not had a chance to test these three things, but Alexa has worked well with Itead’s other products.